Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob stopped working one day, it could be due to a dead coin battery or water damage the receiver module or a malfunctioning electronic chip. Fortunately, these issues are easy to fix and you'll have your vehicle back to normal in no time at all!
Car keys can also fail because the key blade gets worn. You can easily fix the issue by visiting your local Car Key Man Auto Locksmith to install a new blade.
Battery
The key fob of your Peugeot 308 may die or become weak enough to not send a strong signal. This can cause the key fob to stop working, preventing you from locking and opening the doors or starting your engine. You'll need a new battery for your key fob to correct this.
You'll need batteries for replacement from an auto parts shop or your local hardware store. Make sure that the battery is brand new and not on the counter for too long. A brand new battery will have greater capacity and be able to send a stronger signal to the car.
After replacing the battery, try unlocking the doors and locking them with the key fob. If the doors don't unlock it is most likely to be with the receiver module of your car that can be reset by your local Peugeot dealer.
It's possible that the key fob's internal chip has been damaged. It is possible to cause damage to your key fob when you drop it on the ground, or expose it to water. The rubber seals that protect your chip from moisture may get worn out over time. This is especially true when you expose your key fob to water over long periods of time, for example, submerging it at the beach in the ocean. To prevent this from happening it is recommended to keep your key fob free of moist areas and away from water.
Water Damage
If your key fob gets wet, regardless of whether you dropped it in the pool or fumbled it into a puddle, don't think it's a case of lost cause. While the key fob has rubber seals to protect it from water, prolonged exposure to water may cause damage to the electronic chip. Because water is an excellent conductor so any water that makes it inside the key fob will result in a series of short circuits that eventually destroy the chip. After removing the batteries clean the contacts using isopropyl and then dry them completely before putting them back into.
Your Peugeot 308 may not start because of the battery being dead. Jumper cables can be a great method of restarting the engine in case you have an extra car. If the battery is faulty it is required to replace it.
A poor receiver in the car may also block it from receiving the signal from the keyfob. It could be a issue with the antenna or wiring, or the key fob may be damaged. If you have a new key fob, it might need to be programmed to your vehicle. If you're not able to fix the problem, contact an expert technician. A technician who is trained in the field will be able to detect the issue quickly and then fix it right away.
Radio Interference
The signs of a key fobs not being recognized or with a limited range usually indicate that there is a problem with the system. This can be either radiated, or conducted, with the former resultant from power supply cables and speaker wiring that is too close to electrical components. Generally, re-routing the cables or moving them further away from these components could solve the problem.
It's unlikely that someone is monitoring your key fob's signals to take your car away, but it is possible that the signal is being distorted by radio frequency interference. Luckily, this is a simple issue to repair.
If your key fobs that aren't being recognized, try a new battery. Also, make sure that the battery is of the proper size and type. Batteries that aren't the correct size could damage your battery.
These devices could interfere with the key signal if they are using the same radio frequency. Avoid connecting these devices to your key fob.
Pairing Issues
The remote keyless entry system in the car is equipped with a receiver which receives radio signals from the key fob. If www.g28carkeys.co.uk has developed problems, you won't be in a position to start your car even if the key fob works and can be modified. The issue can be caused by a range of things, including an inoperative coin battery or water damage. The receiver may also be malfunctioning due a software error or internal damage to the key itself.
One of the main reasons for why your Peugeot 308 key fob is not working is that the coin battery inside has died. It is easy to replace it by using a fresh battery, however, it is essential to get the right battery for your key fob. A bad battery can cause more problems with the key fob, therefore it is recommended to use either the original or the replacement that is identical in size, voltage and specifications.
Another reason why the reason your Peugeot 308 key fob might not be working is due to the fact that it is paired with an unrelated vehicle. This could be the case if you have given your key fob to a friend or when the key has been used to unlock and start other vehicles. This can be resolved by reprogramming the fob using an OBDII scanner. This tool will request information about your car, such as its VIN or engine type. It is crucial to enter the correct details.